Home

  Products and Services

  Gas Scrubbing

  Electrostatic Precipitators

  Fabric Filters
 PowerJet™ Fabric Filters
PowerJet™ I series
PowerJet™ II series
PowerJet™ III series
Technical Services
Replacement Parts
Upgrade Parts
Accessories
Glossary

  News & Events

  About us

  What equipment do I need?

  Troubleshooting
 
 
Call us TOLL FREE
1800 424 269
(within Australia)
+61-2-4272 5233
(outside Australia)
 
 
 
A wholly owned subsidiary of:

EGL

ASX Listing under "EGL"

Proud members of:
APCEMA
The Air Pollution Control
Equipment Manufacturers
Association of
Australia

Home >> Fabric Filters >> PowerJet™ Fabric Filters >> PowerJet™ I Series

PowerJet™ Fabric Filters        

PowerJet™ I

  • Small applications like silo and conveyor venting
  • Flexible design which can be supplied as a conventional silo vent, as “insertable” unit or with a hopper.
  • Gas flows up to 2,000 Am3/h
  • Gas temperatures up to 140°C
  • Small footprint, high capacity design
  • Low height design to avoid access platforms to service the unit.
  • Easy lift off lid with high quality silicone seals for prevention of rain ingress.
  • Can have an integral fan fitted to maintain a negative pressure in the storage bin/silo.


When you buy a TAPC fabric filter you can be assured that you are buying the best, most robust, industrial filter on the market today.
PowerJet I

Case History

Calcium Carbonate Manufacturer, Australia - Silo ventilation.
Background:
This customer had substantial problems with dust emissions with the old silo vent filters.  Additionally, the old filters required harnesses and confined space entry to replace filter bags.

Outcomes:
TAPC supplied four new PowerJet I™ filters which each had double the filtration area of the old units.  The filter uses GE PulsePleat® elements which were almost half the length of the old bag/cages.  Filter changes can now be done easily through the top hatch and the additional cloth area and better filter elements create lower emissions.

Location NSW
Completion Date 2012
Project Duration   3 months
PowerJet I

TAPC Scope of Work:
Design, supply, install and commission four off PowerJet I fabric filter systems for a storage silos.

Equipment Supplied:
 
  • 4 off PowerJet I silo filters
  • 4 off adapter flanges for the mounting of the filter
  • GE PulsePleat® filter elements
  • Modern pulse cleaning system and DP timer
  • Full installation including removal of old units
  • Commissioning, training & testing
Design specifications:
 
  • Gas Flow rate : approx. 500Am3/hr
  • inlet load : unknown
  • outlet load : <20 mg/Nm3
  • Removal efficiency : >99.5%
  

 


Home | Products and Services | Gas Scrubbing | Electrostatic Precipitators | Fabric Filters | News and Events | About Us | EGL Website

©2012 Total Air Pollution Control Pty Ltd.
All Rights Reserved. Unauthorised copying and reuse of any content in any form is strictly prohibited.
Use of this Web site constitutes acceptance of the TAPC User Agreement and Privacy Policy.